Copyright 2012: SC Supply Company, LLC. Traffic Cones. All rights reserved.
PO Box 11531 South Bend, IN 46634-0531
574-287-0252 | [email protected]
HomeAbout UsTraffic ConesPoliciesContact

Toll Free 
Local - 1-574-287-0252
Fax - 1-574-234-5066
Hours 7:30 to 5:30 EST
Flexible Bollard - Bollard Flex System
Our flexible bollard is ideal for use as a vehicle lane marker or to help guide traffic safely. It can also be used in place of parking blocks to reduce liability and help protect vehicles from unnecessary damage.

The BollardFlex System is made with a standard 7” x 52” bollard cover attached to a heavy duty spring that delineates from 360 degrees with 9lbs. of pressure. This flexible bollard comes with a steel post underneath for added strength and a steel base that can be anchored to concrete, asphalt or natural ground.

Also comes in a 72" height!


Diameter: 7.35” outside diameter
Length:  52” outside height
Wall thickness:  .125” wall thickness HDPE
Base:  9.5” square 7 Gauge Standard Steel Base Plate
Post:  1-5/8” Round Galvanized Post 
Material:  HDPE/Steel
Accessories:  Mounting Hardware included for Either Concrete, Asphalt, or Natural Ground Surfaces
Bollard Colors:  Black, blue, brown, bright green, federal yellow, grey, green, light grey, orange, red, tan, white, yellow
Reflective Material:  3M #5100 Scotchlite film – available in black, blue, green, orange, red, white, yellow
Warranty:  1-year warranty against manufacture defects
Made in USA
​1 - 5
​6 - 12
​52" Bollard Flex System - Concrete Model
​​52" Bollard Flex System - Asphalt Model
​​52" Bollard Flex System - Natural Ground Model
Installation Instructions
Asphalt Mounting Instructions            Concrete Mounting Instructions           Natural Ground Mounting Instructions

Your source for traffic safety cones, traffic safety signs, traffic barricades, reflective apparel & so much more!

SC Supply Company, LLC