We carry a large array of Traffic Sign Stands for both Roll-up Signs and Aluminum / Rigid Signs. We carry sign stands that range from economical to highly visible stands that can withstand 65 mph winds. Many of our stands come with the fast kick release system, locking legs into place when fully extended. Our stands are made from quality aluminum and steel. We also carry a selection of accessories for your sign stands. All of our sign stands meet MUTCD specifications and are NCHRP-350 compliant. All of our Sign Stands will hold 36" & 48" Roll-Up Signs - Sign Stands that hold Rigid / Aluminum Signs are noted beneath the sign photo.
Sign Stand Accessories are located at the bottom of the page.
Categories
Copyright 2012: SC Supply Company, LLC. Traffic Cones. All rights reserved.
PO Box 11531 South Bend, IN 46634-0531
574-287-0252 | sales@SCSupplyCo.com
HomeAbout UsTraffic ConesPoliciesContact

800-640--1843
574-287-0252
The Pogo Stand is an economy sign stand designed to hold 36" and 48" roll-up signs. 

  • Great for In-ground Installation of Roll-up Signs 
  • Meets MUTCD specifications and is NCHRP-350 Compliant.
  • Holds 36" and 48" Vinyl and Mesh Signs 
  • 7LBS

$25.50
Pogo Sign Stand - # PGS
The T55 tripod is an all-purpose three legged economy sign stand designed to hold 36" and 48" roll-up and rigid signs. Powder coated steel construction and ease of use makes the T55 a smart choice for low to medium wind conditions. 

• Meets MUTCD specifications, NCHRP-350 compliant.
• Compact storage, economical, and easy to use.
• Holds 36" and 48" roll-up and rigid signs.
• Powder coated, all steel construction.
• Storage size: 2" x 4.5" x 62"
• Open footprint: 48" x 57"
• Weight: 10 lbs.
  $37.40
T-55 Tri Pod Stand
The T155 tripod is an all-purpose three legged heavy duty sign stand designed to hold 36" and 48" rigid signs. Roll-up signs can also be displayed with the addition of the optional adapter. (SEE BELOW)

• Meets MUTCD specifications, NCHRP-350 compliant.
• Telescoping mast, flag holder for 3 standard flags.
• Displays 36" and 48" rigid signs
• Displays roll-up signs with the addition of 
• Powder coated, rugged square tubular steel construction.
• Storage size: 4.5" x 8" x 55"
• Open footprint: 48" x 57"
• Weight: 16 lbs.
optional #RUB100 roll-up sign adapter. $8.00
  $67.95
T-155 Tri Pod Stand
DL1003 Non-Flexible Sign Stands
DSB100 - Stacker Sign Stand
 Low profile rubber base design is ideal for limited storage or display areas.
• Recessed trim molded into rubber base allows for firm, compact storage.
• Two molded handles allow for easy transport to and from the work zone.
• Pocket panel holder clamps roll-up sign to stand utilizing the plastic pocket on the sign panel. Also available with the universal ScrewLock™ sign holder.
• Mast folds down into rubber base via kick release for storage.
• Weights available:DSB100 - 42 lbs., DSB100HD - 48 lbs.
• Size: 3" tall x 20" wide x 28" long. #DSB100 - Pocket Sign Holder $97.35
DSB100-W -ScrewLock Sign Holder  $103.95
DSB100HD - Pocket Sign Holder  $99.95
DSB100HD-W - ScrewLock Sign Holder  $109.75 

• NCHRP 350 compatibility- crash test results available.
• Complies with MUTCD standards Lightweight - perfect for low wind applications.
• Displays 36" and 48" signs using ScrewLock™ attachment.
• By eliminating a spring mechanism, this stand weighs 20% less than Dynaflex™ stands.
• Fast and easy deployment with the kick release system.
• Legs lock into position when fully extended.
• All aluminum and steel construction
• Telescoping aluminum legs with two position height adjustment and anti-skid foot pads.
• Open footprint: 92" x 53" 
• Minimum height from the ground to bottom of sign: 12"

DL1003L with the Latch Style sign holder. 
DL1003W with the Screwlock™ sign holder.
  $111.75
Uniflex UF2000W Sign Stand
​TwinFlex TF18 Series Sign Stand
TwinFlex TF12 Series Sign Stand
​• NCHRP 350 compatibility - crash test results available.
• Complies with MUTCD standards Features versatile, compact single-coil spring.• Ease of use with fast kick release system, locking legs into place when fully extended.
• Displays 36" and 48" roll-up signs in several configurations.
• All aluminum and steel construction.
• Telescoping aluminum legs with two position height adjustment and anti-skid foot pads.
• Minimum height from the ground to bottom of panel: 12" 
• Full extension length: 51"
• Open footprint: 92" x 54" 

                        $133.65 

A Best Seller &
Contractors Favorite


​ NCHRP 350 compatibility- crash test results available.
• Complies with MUTCD standards.
• Wind-relieving, dual upright coil spring system - withstands heavy wind gusts.
• Ease of use with fast kick release system, locking legs into place when fully extended.
• Displays 36" and 48" Roll-Up & RIGID Signs.
• All aluminum and steel construction.
• 1-1/4" sq. egs with two position height adjustment and anti-skid foot pads.
• Open footprint : 36" x 84"
• Minimum height from the ground to bottom of panel: 18" (457 mm)

TF18-RUB 
 Aluminum Legs - Roll-Up Signs  $186.45
TF18-RGB  
Aluminum Legs - Rigid Signs  $190.30
TF18-RG/RU  
Aluminum Legs - Roll-Up & Rigid Sign  $202.95
STF18-RUB 
Orange Steel Legs - Roll-Up Signs  $172.85
STF18-RGB 
Orange Steel Legs - Rigid Signs  $176.75
STF18-RG/RU 
Orange Steel Legs - Roll-Up & Rigid  $189.35
​ NCHRP 350 compatibility- crash test results available.
• Complies with MUTCD standards.
• Wind-relieving, dual upright coil spring system - withstands winds to 65 mph.
• Ease of use with fast kick release system, locking legs into place when fully extended.
• All aluminum and steel construction.
• Telescoping aluminum legs with two position height adjustment and anti-skid foot pads.
• Full extension length: 51" each leg.
• Open footprint : 92" x 54" Minimum height from the ground to bottom of panel: 12"

TF12W - Screwlock™ for signs with fiberglass cross bracing.  $162.50

TF12C - Holds signs designed to fit Channel Style holders.  $157.30

Shown with Rigid Sign
TwinFlex TF60 Series Sign Stand
TwinFlex TF84 Series Sign Stand
​NCHRP 350 compatibility- crash test results available.
• Complies with MUTCD standards.
• Wind-relieving, dual upright coil spring system for stability in gusty winds.
• Ease of use with fast kick release system, locking legs into place when fully extended.
• Displays 36" and 48" roll-up and rigid signs.
• All aluminum and steel construction.
• 1-1/4" sq. aluminum legs with two position height adjustment and anti-skid foot pads. Open footprint : 74" x 135" (1880 mm x 3429 mm) 
Minimum height from the ground to bottom of panel: 5 ft

TF60-RUB - Roll-Up Signs  $236.35
TF60-RGB - Rigid Signs  $242.75
TF60-RG/RU - Rigid and Roll-Up Signs  $249.50
NCHRP 350 compatibility- crash test results available.
• Complies with MUTCD standards.
• Wind-relieving, dual upright coil spring system for stability in gusty winds.
• Ease of use with fast kick release system, locking legs into place when fully extended.
• Displays 36" and 48" Roll-Up and Rigid signs.
• All aluminum and steel construction. Weight: 48.5 lbs
• 1-1/4" sq. aluminum legs with two position height adjustment and anti- skid foot pads. Open footprint : 74" x 135" 
• Minimum height from the ground to bottom of panel: 7' ft

TF84-RUB  - Roll-Up Signs  $255.70 
TF84-RGB  - Rigid Signs  $252.40 
TF84-RG/RU  - Roll-Up & Rigid Signs $268.15 
DF3000 Series DynaFlex Sign Stand
• NCHRP 350 compatibility- crash test results available
• Complies with MUTCD standards
• Features wind-relieving dual torsion spring system
• Ease of use with fast kick release system, locking legs into place when fully extended
• Displays 36" and 48" signs using ScrewLock™ attachment 
• All aluminum and steel construction 
• Telescoping aluminum legs with two position height adjustment and anti-skid foot pads
• Full extension length: 51" each leg
• Open footprint: 92" x 57-1/2" 
• Wind-relieving, dual torsion spring system - withstands winds up to 65 mph
• Minimum height from the ground to bottom of panel: 12"

DF3000W - 22" legs that telescope to 38" $133.00
DF3003W - 30" legs that telescope to 51" $141.75
DF4503 Series DynaFlex Sign Stand
• NCHRP 350 compatibility - crash test results available.
• Displays 36: and 48" roll-up sign panels 5 feet off the ground.
• Fast and easy deployment with the kick release system.
• Telescoping aluminum legs feature two position height adjustment for uneven terrain and anti-skid foot pads.
• Mast and legs are made of lightweight corrosion-resistant aluminum tubing, all steel components are coated to reduce corrosion.
• Holds up to three flags.
• Open footprint - full leg extension: 72" x 117" 
• Leg length: 49" Leg extended: 65" 
• Weight: 37 lbs.

  $226.25


18" Vinyl Flag with 24" Wood Staff - #1024-V18- $2.90 each
Toll Free 
1-800-640-1843
Local - 1-574-287-0252
Fax - 1-574-234-5066
Hours 7:30 to 5:30 EST

Contact Us
(Roll-Up & Rigid Sign Stand Holder)
(Roll-Up (with adapter) & Rigid Sign Stand Holder)
(Roll-Up & Rigid Sign Stand Holder)
(Roll-Up & Rigid Sign Stand Holder)
(Roll-Up & Rigid Sign Stand Holder)
Sign Stand Accessories

Folding Flag System

The folding flag system keeps vinyl flags with the sign at all times. The flags roll up inside the sign for protection, with a simple and easy to use mechanism. Available installed on new sign panels or easily installs on existing signs with one screw.
Pivot flags into alignment with each other and rotate around to storage position. Reverse to deploy.
FFS-2-B  (Folding Flag System - 2 Flags)   $14.25
Add On & Replacement Flag Holders
​FHRU
​Three Flag Holder - Rib Clamp Installment
​$10.50
​$9.50
Scroll down to see our GREAT Prices or
Give us a call at 800-640-1843 or                   for a quote!
​$7.62
​$7.62
​FH-STABLOCK
​FH3010
​RL-FH3
​Replacement Double Flag Holder for Fold & Roll Sign
​Triple Flag Holder with Flat Plate - Double Holes
​Triple Flag Holder with Shaped Plate - Single Hole
Roll-Up Sign Brackets
​RUB3315
​Roll-Up Sign Bracket
$19.65
$32.15
$8.50
$8.50
$16.95
​Truck Mount Bracket for Compact Stands
​Multi-Clamp Bracket for Roll-Up Sign
​Uni-Clamp Bracket for Roll-Up Sign
​Rigid Sign Brackets (Set of 2)
TB3000
390-MC
UC100
RGB4000
Sign Stand Carry Cases & Equipment Bags
This Equipment Bag is made from heavy duty vinyl, has polyweb shoulder strap, a zipper closure and one inside pocket.
This Carry case is made from heavy duty vinyl, comes with polyweb shoulder strap and has a zipper closure.
​This carry case is designed to carry one Roll-Up Sign, is made of heavy duty vinyl and a velcro closure. Model numbers ending in H feature a carry handle.
BE24 - 24" long equipment bag    $58.08
BE36 - 36" long equipment bag    $60.95
B36 - Holds 2, 36" signs & 2 compact stands $56.18
B48 - Holds 2, 48" signs & 2 compact stands $80.93
​B36SOH - Sign Bag with handle, (1) 36" Sign $11.90
​B48SOH - Sign Bag with handle, (1) 48" Sign  $12.75
​B36SO - Sign Bag NO handle, (1) 36" Sign  $11.18
​B48SO - Sign Bag NO handle, (1) 48" Sign  $12.05
(Sign Legend Screened on ANY bag - $3.50 Charge per Bag)
**Compact Sign Stands: UF2000W, DL1003W, DF3003W, DF3000W

Roll Up & Rigid Sign Stands and
- Sign Accessories -

Powered by:
SC Supply Company
Traffic Cones & Traffic Safety Supplies
SAFETY CONES USA 
Your source for traffic safety cones, traffic safety signs, traffic barricades, worker safety & so much more!