HD600 SERIES  
Ground/Soil Mount Delineator

Anchor:   18" in ground 
Colors:    W, R, O, Y, Gr, Bu, Br, Gy 
Height:    18" to 72" Above Ground 
Weight:   1.25 to 2 lbs.
Sheeting: Reflective (federally approved - sold separately)

FlexStake HD is an all weather, ground mounted delineator that can take up to 100 vehicular impacts at 55 mph. It is unbeatable in areas where ordinary markers suffer a high failure rate. 

The post is a color impregnated, UV stabilized polycarbonate extrusion - impact-resistant to 80 mph. The hinge is hi-density, all-weather polymer, mechanically fastened to a patented barbed anchor that really stays in the ground. The anchor is a hi-density polymer that is unaffected by adverse soil conditions.

May be fitted with federally-approved reflective materials.
Hi Intensity Sheeting sold separately.

Categories
Copyright 2012: SC Supply Company, LLC. Traffic Cones. All rights reserved.
PO Box 11531 South Bend, IN 46634-0531
574-287-0252 | sales@SCSupplyCo.com
HomeAbout UsTraffic ConesPoliciesContact

800-640--1843
574-287-0252
Toll Free 
1-800-640-1843
Local - 1-574-287-0252
Fax - 1-574-234-5066
Hours 7:30 to 5:30 EST

​Our flexible delineators are made in the USA by FLEXSTAKE. FlexStake is a world leader in high impact flexible delineators. 

TM650 SERIES  
Tubular Ground/Soil Mount Delineator

Anchor:   Ground Mount 
Colors:    W,, O, Y
Height:    19", 24", 30", 36" & 48" Above Ground 
Sheeting: Reflective (federally approved - sold separately)

FlexStake's 650 Series is an all-weather, tubular ground mounted delineator that can take 30 -100 more hits than our competitors posts. Our tubular ground mount delineators are highly visible at 360 degrees. The 650 Series clearly delineates the edge of a roadway or path with specified reflective sheeting mounted on the post at drivers eye level. 

The post is color impregnated, UV stabilized, copolymer extrusion-impact resistant. Post is extruded from a semi-flexible hi-impact polymer. The hinge is hi-density, all-weather polymer, mechanically fastened to a patented barbed anchor that really stays in the ground. The anchor is hi-density polymer that is unaffected by adverse soil conditions.
SM700 SERIES  
Surface Mount Delineator

MTBF:      340 hits at 35 mph, 75 hits at 55 mph 
Height :    19", 24", 30", 36", 48', 60", 72" 
Anchor:    Surface Mount 
Colors:     W, R, O, Y, G, Bu, Br, Gy 
Sheeting: Reflective (federally approved - sold separately) 

The FlexStake Surface Mount SM is the only sensible choice for hi-traffic, hi-impact locations. Using the same color impregnated polycarbonate extrusion and flexible hinge as the virtually indestructible FlexStake HD surface mounted SM's are still standing after 8 years of hard road use. 

FlexsStake's SM's outlast every other surface mounted delineator on the market by an incredible margin. SM's are easy to assemble and quick to install. They can be mounted to concrete, asphalt, wood and other hard surfaces using lag bolts, butyl rubber, epoxy and even nails. 

FlexStake SM is a four part assembly:
1. post and hinge
2. the base
3. the grips
4. the pin

Adhesive and Butyl Adhesive Pads sold separately.

TM 750 SERIES
Tubular Surface Mount Delineator

MTBF:     Over 75 hits at 55 mph 
Height:     19", 24", 30", 36", 48"
Anchor:    Surface or Ground Mount 
Weights:  From 2.25 to 2.5 lbs. 
Colors:     W, Y 
Sheeting: Reflective (federally approved - sold separately)

Though suitable as a multi-purpose traffic delineator, FlexStake TM was especially designed as a hi-impact channelizer for sites where traffic from side streets would be merging with traffic in a thoroughfare. The TM is an impact-resistant surface mounted post that has all the advantages of the internationally acclaimed FlexStake SM, plus an enhanced 360 degree visibility.

The TM channelizer maybe mounted on concrete, asphalt or to the FlexStake Flatfoot. For channelization in sand, dirt or loose rock, the FlexStake TMG (Tubular Ground Mount) is the post of choice.

The TM Marker is a five-part assembly:
1. the post
2. the inner-core and hinge
3. the base
4. the grips
5. the pin

Adhesive and Butyl Adhesive Pads sold separately.

TM 750 SERIES Flat Top
Tubular Surface Mount Delineator

MTBF:     Over 75 hits at 55 mph 
Height:     19", 24", 30", 36", 48" 
Anchor:    Surface Mount 
Weights:   From 2.25 to 2.5 lbs. 
Colors:     W, Y 
Sheeting: Reflective (federally approved - sold separately)

The TM 750 Series Flat-Top is a high impact-resistant surface mounted channelizer and is suitable as a multi-purpose traffic delineator.

The TM channelizer maybe mounted on concrete, asphalt or to the FlexStake Flatfoot. For channelization on a hard surface, the FlexStake TMG (Tubular Ground Mount) is the post of choice.

The TM Marker is a five-part assembly:
1. the post
2. the inner-core and hinge
3. the base
4. the grips
5. the pin

Adhesive and Butyl Adhesive Pads sold separately.
EZ DRIVE SERIES

Height: 19", 24", 30", 36", 48" 
Anchor: Ground Mount 

EZ Drive is the only post on the market that can be tied in a knot and yet it is so stiff it can withstand high wind loading. This competitive, moderate impact marker is also the easiest to install.

EZ Drive has been approved for highway use in some states for moderate and low impact locations such as off-ramps, curbing and barriers. The post is able to withstand up to 50 vehicular impacts at 45 mph.

EZ Drive is particularly well suited for marking parks and recreation facilities, buried pipelines, conduits and cables. Installed to the proper depth, it is virtually impossible to pull out of the ground.
E-BASE

MTBF:     40 hits at 45 mph 
Height Above Grade:  36", 48" 
Anchor:    Surface Mount 
Colors:     W, R, O, Y, G, Bu, Br, Gry 
Sheeting:  Reflective 

Mean time before failure. Results of certified tests made under controlled conditions. Results may vary depending upon type of installation and geographic location. 

Suitable for installation in any environment, E-Base is a truly bid-competitive high-impact delineator. Though not as bullet-proof as our duplex post, the E-Base post is still a very high quality product; a unique, UV-stabilized, copolymer extrusion. To reduce mounting costs, the base itself is just one part. It is cast from a modified, high-density, UV stabilized co-polymer, capable of lasting many years.

Hi Intensity Sheeting and Adhesive Pads sold separately

Give us a call at 800-640-1843 or                   for a quote!
Contact Us
Flexstake Delineators
Powered by:
SC Supply Company
Traffic Cones & Traffic Safety Supplies
SAFETY CONES USA 
Your source for traffic safety cones, traffic safety signs, traffic barricades, flexstake & so much more!
NEW
MTBF: 80 hits at 70 mph (tested on 3 foot model, 85 degrees F) 50 hits at 70 mph (tested on a 4 foot model, 85 degrees F)
Height: 19” 24” 30” 36” 48”
Base: Surface Mount using Flexstake’s patented Mesh Base Technology
Weight: 3.5 lbs (approximate)
Colors: Red, White, Blue, Orange, Yellow, Green, Gray. 
Sheeting: As per customer specifications
The Flexstake HP 770 tubular surface mount delineator was developed for Interstate 95 Managed Lanes Phase Two which consists of thousands of delineators 10 feet apart.

These delineators separate express toll lanes from general trac (see Fig. 1) This delineator is one of the most tested and scrutinized posts built. Many DOT officials, including contracted Project Engineers have witnessed testing.
Fig. 1
HP 770 (High Performance) 360 degree
Surface Mount Delineator
four part assembly:
1. Post
2. Ring
3. Inner core and hinge
4. Pin (straight or quick release)